Generator Options
Yes you can operate your geothermal system on a generator. Of course you need a generator that has a high enough output to operate both the system and your essential appilances in your home at the same time when needed. Below is a list of options that can handle both. Keep in mind that a generator should not be operated at full capacity for long periods of time as this will shorten its life. Estimates are for outside standby generators primanently mounted in place. Generators will be Guardian brand unless orther wise note on the estimate.
|
Unit size |
Output capacity |
Enclosure Material |
Total Installed cost * (For basic installation) |
Size of Geothermal unit it will operate and your home |
|
14 KW with 14 circuit load center |
58 amps @ 240V 116 amps @ 120V |
steel |
$5,750.00 |
up to 3 ton |
|
14 KW with 200 amp automatic transfer switch |
58 amps @ 240V 116 amps @ 120V |
steel |
$6,750.00 |
up to 3 ton |
|
17 KW with 16 circuit load center |
71 amps @ 240V 142 amps @ 120V |
steel or aluminum |
$6,550.00 $7,250.00 |
4 or 5 ton |
|
17 KW with 200 amp automatic transfer switch |
71 amps @ 240V 142 amps @ 120V |
steel or aluminum |
$6,500.00 $7,900.00 |
4 or 5 ton |
|
20 KW with 200 amp automatic transfer switch |
83 amps @ 240V 166 amps @ 120V |
aluminum |
$8,300.00 |
6 ton |
* Prices are estimates. Individual circumstances may require additional costs. Information is based on using propane fuel. Split meter systems will require additional cost on individual bases.